LK Studio
home news products support contact русская версия english version
LK60 LK80 VINTAGE LUX LK45 AQUA-MODUL AQUA STANDARD LAN
Serie LK60
Serie LK80
Other frameworks for LK 80 series of mechanisms
Serie VINTAGE
Serie LUX
Modul serie LK45
Modular system AQUA-MODUL
Serie AQUA
Serie STANDARD for outdoor use only
LAN components
Floor boxes
Mini-columns & Service poles
Junction and disctribution boxes
Technical support
Telephone & PC (RJ) sockets serie AQUA-MODUL
   The series consists of single and double RJ11 telephone socket with 4 pins, as well as single and double computer socket RJ45 with 8 high-quality contacts. Depending on your needs, you can choose the computer outlet Category 5e or 6e. The modular design of the series you can also install telephone and computer outlets together.
  Formulation of batch
Upper plate with shutter window for plug 22,5х45mm serie AQUA-MODUL
choose colors
Upper plate with shutter window for plug 22,5х45mm
The degree of protection IP 20.
Colors outlets
White Cream Silver Black
Upper plate with shutter window for plug 45х45mm serie AQUA-MODUL
choose colors
Upper plate with shutter window for plug 45х45mm
The degree of protection IP 20.
Colors outlets
White Cream Silver Black
Complete outlets
Single telephone socket jack RJ11 (6 contacts), serie LK45
Single telephone socket jack RJ11 (6 contacts)
Single computer socket jack RJ45 cat 5e (8 contacts)
Single computer socket jack RJ45 cat 5e (8 contacts)
Механизм розетки компьютерной RJ 45 под накладку кат 6е.
Single computer socket jack RJ45 cat 6 (8 contacts)
Installation instructions outlets
1. For installation in the box:
- Connect the cable ends into the grooves of contact terminals according to the scheme (see the inside of the mechanism)
- Fasten the rear / top of the transparent cover of the contact mechanism
- Establish a mechanism to overlay 45x22, 5 or 45x45 mm
- Insert mechanism to grip the caliper and set it back box
- Tighten the spacer legs with two screws
- Set the selected frame

Two. For installation in cable - channels and columns:
- Connect the cable ends into the grooves of contact terminals according to the scheme (see the inside of the mechanism)
- Fasten the rear / top of the transparent cover of the contact mechanism
- Establish a mechanism to overlay 45x22, 5 or 45x45 mm
- Insert mechanism with a support plate in the cable channel or column
- To establish a support frame

Three. Telephone & PC (RJ) sockets are going to double from the two mechanisms of sockets and pads 45x22, 5 mm by installing the caliper.
Copyright © LK Studio Trade Mark 2011
All rights reserved
Design by Sergey Dorodnikov Sitemap