LK Studio
home news products support contact русская версия english version
LK60 LK80 VINTAGE LUX LK45 AQUA-MODUL AQUA STANDARD LAN
Serie LK60
Serie LK80
Other frameworks for LK 80 series of mechanisms
Serie VINTAGE
Serie LUX
Modul serie LK45
Modular system AQUA-MODUL
Serie AQUA
Serie STANDARD for outdoor use only
LAN components
Floor boxes
Mini-columns & Service poles
Junction and disctribution boxes
Technical support
Dimmers serie LK80
   Dimmers are equipped with a triple series LK80 protected from overheating, short circuits and overloads. Lighting will easily find the dimmer in the dark. Thanks to the frame structure you can find the required color combination of panels and frames, as well as to establish a single frame of a combination of mechanisms necessary for one to five "job" posts.
  Formulation of batch
Dimmer mechanism 30-450W for incandescent lamp and HV halogen lamp serie LK80
choose colors
Dimmer mechanism 30-450W for incandescent lamp and HV halogen lamp
Electrical: 2-2.4 A, 250 V ~
Reliable screw clamp the wire for aluminum and copper wires up to 2,5mm2.
The degree of protection IP 20.
Attention! Dimmer is designed for use with incandescent and halogen lamps for a voltage of 220 V, as well as halogen lamps through the transformers. Do not use with fluorescent lamps.
Colors panels
White Cream Silver Black brown
Dimmer mechanism 60-600W for incandescent lamp and HV halogen lamp serie LK80
choose colors
Dimmer mechanism 60-600W for incandescent lamp and HV halogen lamp
Electrical: 2-2.4 A, 250 V ~
Reliable screw clamp the wire for aluminum and copper wires up to 2,5mm2.
The degree of protection IP 20.
Attention! Dimmer is designed for use with incandescent and halogen lamps for a voltage of 220 V, as well as halogen lamps through the transformers. Do not use with fluorescent lamps.
Colors panels
White Cream Silver Black brown
Mounting dimmers
  Attachment to the surface using screws. Also, dimmers can be installed on lifting boxes for open wiring. If you are using a special caliper can be mounted dimmer in a series LK80 cable channels and service of the column.
Instructions for installation dimmers
1. For installation in the box: - Connect the bare ends of wires into the slots of the contact terminals - Tighten the screws with a screwdriver - Set the device into the mounting box and tighten the two screws spacer legs - Unscrew the central nut mechanism dimmer knob - Set the selected frame - Insert a central pad dimmer in the selected frame - Tighten the central nut grip - Put the key-rokoyatku dimmer * For installation in the box with self-tapping screws and slide the cable channels is recommended to remove the spacer legs.
Copyright © LK Studio Trade Mark 2011
All rights reserved
Design by Sergey Dorodnikov Sitemap