LK Studio
home news products support contact русская версия english version
LK60 LK80 VINTAGE LUX LK45 AQUA-MODUL AQUA STANDARD LAN
Serie LK60
Serie LK80
Other frameworks for LK 80 series of mechanisms
Serie VINTAGE
Serie LUX
Modul serie LK45
Modular system AQUA-MODUL
Serie AQUA
Serie STANDARD for outdoor use only
LAN components
Floor boxes
Mini-columns & Service poles
Junction and disctribution boxes
Technical support
Telephone & PC (RJ) sockets serie LK80
   The series consists of single and dual RJ-11 telephone jacks with 4 pins, as well as single and double computer socket RJ45 with 8 high-quality contacts. Depending on your needs, you can choose the outlet Category 5e or 6e. Thanks to the frame structure you can find the required color combination of panels and frames, as well as to establish a single frame of a combination of mechanisms necessary for one to five "job" posts.
  Formulation of batch
Single telephone socket RJ11 (6 contacts) with upper plate serie LK80
choose colors
Single telephone socket RJ11 (6 contacts) and RJ45 cat 5e (8 contacts) with upper plate
Sockets provide a summing up of telephone and computer wires to connect to their equipment.
The degree of protection IP 20.
Colors panels
White Cream Silver Black brown
Double telephone socket 2xRJ11 (6 contacts) with upper plate serie LK80
choose colors
Double telephone socket 2xRJ11 (6 contacts) and RJ45 cat 5e (8 contacts) with upper plate
Sockets provide a summing up of telephone and computer wires to connect to their equipment.
The degree of protection IP 20.
Colors panels
White Cream Silver Black brown
Fixing telephone and computer outlets
  Attachment to the surface using screws. Also, telephone and computer outlets can be installed on lifting boxes for open wiring. If you are using a special caliper can be mounted in a socket serie LK80 cable channels and service of the column.
Installation instructions outlets
  1. For installation in the box:
- Remove the outlet cover plate information center by pushing two prongs attaching the rear of the connecting cable ends into the grooves of contact terminals according to the scheme (see the inside of the mechanism)
- Fasten the rear / upper transparent cover contact mechanism
- Set the device into a wiring box
- Tighten the spacer legs with two screws
- Apply the selected frame
- Insert the central pad to the selected frame and fasten it

* For installation in the box with self-tapping screws and slide the cable channels is recommended to remove the spacer legs.
Copyright © LK Studio Trade Mark 2011
All rights reserved
Design by Sergey Dorodnikov Sitemap