LK Studio
home news products support contact русская версия english version
LK60 LK80 VINTAGE LUX LK45 AQUA-MODUL AQUA STANDARD LAN
Serie LK60
Serie LK80
Other frameworks for LK 80 series of mechanisms
Serie VINTAGE
Serie LUX
Modul serie LK45
Modular system AQUA-MODUL
Serie AQUA
Serie STANDARD for outdoor use only
LAN components
Floor boxes
Mini-columns & Service poles
Junction and disctribution boxes
Technical support
Rotary push-buttons Vintage
   Contact switches are designed for currents up to 16A, and provide enhanced security. The series includes all the circuit breakers and switches. Thanks to the frame structure you can find the required color combination of panels and frames, as well as to establish a single frame of a combination of mechanisms necessary for one to five "job" posts.
  Formulation of batch
One gang one way switch (1) vintage
choose colors
One gang one way switch
Electrical: 10-16 A, 250 V ~
Reliable screw clamp the wire for aluminum and copper wires up to 2,5mm2.
The degree of protection IP 20.
Color of front panel
White black
One gang one way switch with LED light for illuminating
choose colors
One gang one way switch with LED light for illuminating
Electrical: 10-16 A, 250 V ~
Reliable screw clamp the wire for aluminum and copper wires up to 2,5mm2.
The degree of protection IP 20.
Color of front panel
White black
Switch-button one-key
choose colors
Switch-button one-key
Electrical: 10-16 A, 250 V ~
Reliable screw clamp the wire for aluminum and copper wires up to 2,5mm2.
The degree of protection IP 20.
Color of front panel
White black
One-button switch on the two directions
choose colors
One-button switch on the two directions
Electrical: 10-16 A, 250 V ~
Reliable screw clamp the wire for aluminum and copper wires up to 2,5mm2.
The degree of protection IP 20.
Color of front panel
White black
One-button switch on the two directions with LED light for illuminating
choose colors
One-button switch on the two directions with LED light for illuminating
Electrical: 10-16 A, 250 V ~
Reliable screw clamp the wire for aluminum and copper wires up to 2,5mm2.
The degree of protection IP 20.
Color of front panel
White black
Two gangs two circuits one way switch (5) серии vintage
choose colors
Two gangs two circuits one way switch
Electrical: 10-16 A, 250 V ~
Reliable screw clamp the wire for aluminum and copper wires up to 2,5mm2.
The degree of protection IP 20.
Color of front panel
White black
Two gangs switch with LED light for illuminating
choose colors
Two gangs switch with LED light for illuminating
Electrical: 10-16 A, 250 V ~
Reliable screw clamp the wire for aluminum and copper wires up to 2,5mm2.
The degree of protection IP 20.
Color of front panel
White black
Two gangs two ways switch (6+6) серии vintage
choose colors
Two gangs two ways switch
Electrical: 10-16 A, 250 V ~
Reliable screw clamp the wire for aluminum and copper wires up to 2,5mm2.
The degree of protection IP 20.
Color of front panel
White black
Mounting switches
  Attachment to the surface using screws. Also, switches can be mounted on the lifting boxes for open wiring. If you are using a special slide switches can be installed in the serie LK60 cable channels and service of the column.
Instructions for installation of switches
1. Remove the key and the pad

2. For installation in the box:
- Connect the bare ends of wires into the slots of the contact terminals
- Tighten the screws with a screwdriver
- Set the device into the mounting box and tighten the two screws spacer legs
- Set the selected frame
- Fasten the cover plate and latch key

* For installation in the box with self-tapping screws and slide the cable channels is recommended to remove the spacer legs.
Copyright © LK Studio Trade Mark 2011
All rights reserved
Design by Sergey Dorodnikov Sitemap